I tried again with a the 810 with 3.2.67 firmware and the touchscreen troubleshooter worked! Input Devices This is an analysis of devices listed under /proc/bus/input/devices Identifier Bus = 0019 Vendor = 001f Product = 0001 Version = 0100 Name = "Roku Monaco input device" Phys = brightsi...

This is what I get... ~~~~~~~~~~~~~~~~~~~~~~~~~~| DirectFB 1.2.8 |~~~~~~~~~~~~~~~~~~~~~~~~~~ (c) 2001-2008 The world wide DirectFB Open Source Community (c) 2000-2004 Convergence (integrated media) GmbH ---------------------------------------------------------------- (*) DirectFB/Core: Single Applic...

I have an 810 with 3.2.67 firmware on it and right out of the box it treats every touch like its dead center, just thought I would add that in case you hadn't had enough of my constant information updates

Lyndon, I have updated the Firmware on 2 units (both 810s). Why 2 units? Because, the update messed up the first unit, it made everything through HDMI green and dark, but VGA appears fine. My results are the same as before however; on the unit that took the update, the one large touch region works, ...

I'm in. I'm in the process of trying the new firmware (3.5.42) as we speak (type). I'm using an HD810 but I have access to nearly every model, I've never had to get as involved as serial and shell but I'll try it at this point.

OK, so as a test I made a new project in BA. One Menu with 5 touch regions (the 4 corners and the center of the screen). 5 possible screens to go to (zero.mpg through four.mpg), each having the entire touch region go back to the menu. No matter where you touch on the screen it goes to the first scre...

SO, the one project file works, but fails if you have multiple touch areas on the screen?

That was my conclusion too.

ok, so these aren't scripts but brightauthor project files. Can you send me the actual bpf files?

PM me with an email to send the .bpf files to.

log.txt of working script 1999/12/31 16:00:13.629 ### create sign object 1999/12/31 16:00:13.688 ### create sign object 1999/12/31 16:00:13.748 ### CreateBSPObjects 1999/12/31 16:00:13.821 ### set background screen color 1999/12/31 16:00:13.867 ### LaunchBSPPlayback Preloaded file in DisplayImage: P...

When you say the calibration never completes, exactly what happens? It starts out, cross upper left, I touch the cross, then lift up and it moves to upper right, lift up and it moves to lower right, lift up and it moves to upper left. This repeats until I eventually give up minutes later. Can you p...

When you try to use this, does a cursor appear on your screen? I'm assuming these are USB touchscreens. No cursor, yes USB. Have you tried running the calibration script form our support page? I can run the calibration script, however it never completes. Finally, which version of the firmware do yo...

According to this press release: http://www.elotouch.com/AboutElo/PressReleases/US/110201.pdf These monitors use a newer technology. Your touchscreen Technote says: "Elo Touch - We support all Elo touch technologies except for APR – Acoustic Pulse Recognition. This particular technology require...

I am using the HD1010 with the expander board as well. As described above - brightauthor 2 doesn´t support the em100 - is there a sample of how to use the 18 GPIO as Inputs? ... is there an easy way to modify the brightauthor .brs and .xml files ? or do i have to do the scripting manually ? thanks...

Thanks, I can't use the expansion board because I need the usb port for the touchscreen. I have a project that requires 23 touch regions and 18 outputs to coincide with the videos that each region plays (a light lights up while the video plays). Is there any way to do this with a brightsign product/...

This post helped me figure out the first step to a problem I am having, but what if I want more than 8 outputs? the Brightauthor program won't let you assign an output higher than 7. I have a GPIO button board and I don't see any way to access the higher number outputs (8-17). How do I get control o...

Update: figured out the "crosshair" now calling it cursor issue, it was answered in another post. I guess my search skills need refined:
viewtopic.php?f=19&t=28576&p=178331&hilit=touchscreen#p178331