[quote="bregent"]The M1000 does have a small buffer, but unless you have extremely slow internet it should not be a problem. What speed is provided by your ISP? Are other devices in your home streaming at the same time? Do you have an unsecured wireless network?[/quote] My Internet connect...
My M1000 is connected directly to my router via Ethernet; I use it to listen to Internet radio. Sometimes (usually in the evenings when everyone in the neighbourhood is online) it will constantly stop playing to rebuffer - it will play for only a 15 or 20 seconds before stalling again. iTunes, on iM...
3.6VA is too small, this will give you only 400 mA (0.4A) at 9 Volts. Correct! As above, you need at least 1.3 to 1.5 amps to have a good margin. More current capability is better. For supplies rated in VA (literally VA = volts times amps) then that means at least 12VA. Personally I would look for ...
From your description it sounds as though your replacement supply does not have a regulated output. If you are unclear on whether your supply has a regulated output then do not guess. Use a voltmeter to measure it. If it is supposed to be 9 volts, then if the meter says 8.8, 9.1, or even 9.4, then ...
The PSU for my M100 stopped working. A multi-voltage PSU I've tried as a replacement works OK for a day or so, then after a while the display starts flickering on and off, and there's a nasty hum from the audio output, until it's unplugged and allowed to cool down again. I don't know if it's the PSU...
After each press of a button on the remote control, I have to wait several seconds before the Soundbridge will respond to the next press. Everything seems to work, but there is an inordinate delay before remote commands receive a response. I left it unplugged overnight, and recharged the batteries ...
After each press of a button on the remote control, I have to wait several seconds before the Soundbridge will respond to the next press. Everything seems to work, but there is an inordinate delay before remote commands receive a response. Hardware: M1000 Software version 3.0.44 and 3.0.52 I've trie...
SoundBridge M1000 ⋅ no display ⋅ the ethernet Link and Rx lights flicker constantly, irrespective of connection ⋅ if inserted, the wireless card does not light up ⋅ completely irresponsive to remote, including attempts to use Safe Mode Thanks for any suggestio...
[quote="mas"]The M1000 uses an outdated wireless module that can only do WEP encryption. The M1001 has a built in chip that with the beta software does wpa and wpa2.[/quote] Great... so the WPA capability that I've needed for so long for my M1000 is basically never coming? What about repla...
I have noticed that my M1000 appears and disappears regularly from my network. I have some logs from the Apple Airport Extreme basestation which is my router, and there are some very odd things there. Here's a snapshot: Sep 16 17:49:07 192.168.0.1 Danieles-Airport-basestation dot11: Deauthenticated ...