Hi everyone,
I've a problem with device r1000. I would ask You for identification 2 elements on board. Now there are only empty places. Can you check on yours boards and write data both transistors? Places of missing elements are mark up a red line.
Thanks a lot for each help.

click for image below:
http://www.wbeskidy.pl/roku_r1000_sbridge.jpg

I happened to have an R1000 open - on the orientation of your image, the lower one has G1 printed on it, whilst the higher one has 8A. There was no other identification that I could make out.

I've uploaded the best photo I could manage of the VFD display board from my unit at the link below - hope this helps.

https://drive.google.com/file/d/0Bw345NmrMBlnMWNXeWhDUmxhY3c/view?pref=2&pli=1

edit: the links below might be useful:
http://alltransistors.com/smd-search.php?search=g1
http://alltransistors.com/smd-search.php?search=8a

That's what I mean. Very thanks for your support Limebrit. I get to work now.

If I can you ask for one more matter, can You verify how many V DC takes R1000 and how many Amps.

thanks

willi76 wrote:

That's what I mean. Very thanks for your support Limebrit. I get to work now.

If I can you ask for one more matter, can You verify how many V DC takes R1000 and how many Amps.

thanks

Are you talking about replacing it's power supply unit (the part that usually fails first/most frequently)? If so, take a look at the power supply replacement threads in the Soundbridge Radio sub-forum - they provide details on the what you'll need.

exactly, thanks again