Your Digital Media Has Never Looked So Good

Topic Author
Posts: 8
Joined: Fri Mar 20, 2009 3:18 pm

automatic network adapter detector

Thu Jul 09, 2009 7:58 am

this feature gives the error message as failed.

failed to find a suitable network driver
tested generic dialup and vpn
tested realtek ethernet adapter

with these problems i cannot view presets on soundbridge or detect radio stations

firewall settings allow snooper
UPnP is enabled
and port settings are open 1900 and 2689

what is needed to install a suitable network driver.
i have re installed snooper
Posts: 709
Joined: Thu Sep 18, 2008 5:49 am
Location: Epping Forest (bordering London), UK

Fri Jul 10, 2009 11:51 pm

Hi blaney07

As others have commented, the Snooper application is not very useful any more, but if you want to persist with it, what are your Network Sniffing Options set to?

If you want to manage your presets manually, just load the Soundbridge UI in a browser.
R1000, M400, M1001
Topic Author
Posts: 8
Joined: Fri Mar 20, 2009 3:18 pm

radio snooper

Sat Jul 11, 2009 2:06 pm

thanks for the replies to my problem.
i must plead ignorance to your questions and i beg your indulgence.

where / how do i select network sniffing options ?

where do i find soundbridge UI ( ? user interface ? )

i was able at one time to use radio sniffer to view / modify soundbridge presets. now with the network adapter issue i no longer can access soundbridge presets.

another user gave me the website for the station in question and it works through media player.

i would still like to manage the presets online. is there another way?

thanks for your patience and knowledge.

what is your preferred method for managing sb presets ?
Posts: 1391
Joined: Mon Jun 11, 2007 10:40 am
Location: Bedfordshire - U.K.

Sat Jul 11, 2009 4:40 pm

Hi again Blaney07,

As I told you once before: "Snooper = Crap" :wink: Like me, this software is very old and of little use these days.

I'm glad you found the link I offered you for WNIR to be working A/OK. To enter this or other stations that will play A/OK on your SoundBridge as a preset, merely enter the IP address of your SoundBridge into the address-bar of your browser (IE or Firefox) then you'll see displayed the "SoundBridge's User Interface -

At the top of this interface-page you'll see: Now Playing| Presets| Configuration| Status - all of which enable the end-user to "fine-tune" or customize their SoundBridge. By selecting ‘Presets’ you’ll then gain access to the available 18 locations.
With your SoundBridge switched on, enter the name of the station, then selecting “URLâ€
Topic Author
Posts: 8
Joined: Fri Mar 20, 2009 3:18 pm

cheers alan

Sun Jul 12, 2009 2:23 pm

i guess i will swim the river / see the light and be reborn as it were.
roku snooper will be history and i will join the flexbridge armada.

fiddled with roku half the weekend and even read the manual - go figure -

thanx for the help - if you ever get to san francisco .... i'm not there.

i may contact you again , but things look promising .

Who is online

Users browsing this forum: No registered users and 2 guests