I would like to get a copy of the SDK

rfisher1968 · Mon Jan 08, 2007 10:59 am

I would like to start trying to create my own applications for SB. What language is it? I hoping C. Can somebody point my in the right direction.

jm_maclaren · Mon Jan 08, 2007 1:47 pm

I got it from the link here. The code I'm working on, mythroku, ises c++ and calls the cascade libraries.

See this thread
http://www.rokulabs.com/forums/viewtopic.php?t=9859

rfisher1968 · Mon Jan 08, 2007 2:14 pm

Thank you for the link. But I have a hd1000 RevB with firmware 2.0.36 so can I still use the SDK from 2.0.34.

TheEndless · Mon Jan 08, 2007 2:21 pm

rfisher1968 wrote:
Thank you for the link. But I have a hd1000 RevB with firmware 2.0.36 so can I still use the SDK from 2.0.34.

2.0.34 is the last available SDK and works with 2.0.34, 2.0.35, and 2.0.36 versions of the firmware.

I've generated Doxygen docs if you're interested. See here for more info: http://www.rokulabs.com/forums/viewtopi ... 9987#39987

TheEndless

rfisher1968 · Mon Jan 08, 2007 4:21 pm

Does the SDK include alot of code examples?

rfisher1968 · Mon Jan 08, 2007 5:07 pm

I just tried to mount the SDK and this is the error i get:

mount -o loop rokudev.cramfs /home/sdk
mount: Could not find a spare loop device

What am I doing wrong?

TheEndless · Mon Jan 08, 2007 5:07 pm

rfisher1968 wrote:
Does the SDK include alot of code examples?

There are a few (I forget which folder they get mounted in). I wouldn't say a lot by any means. The docs I mentioned above do contain a fair number of examples for the older classes. Not so much for the newer stuff...

If I recall correctly, the 1.5.18 SDK available here, comes with a "Getting Started" document with your typical "Hello World" type examples that should work with the 2.0.34 SDK.

TheEndless

I would like to get a copy of the SDK

I would like to get a copy of the SDK

Who is online