Your Digital Media Has Never Looked So Good

 
andrewdunn
Topic Author
Posts: 16
Joined: Wed Apr 14, 2010 4:43 am

DCHP & Proxy settings

Fri May 21, 2010 4:01 pm

Hi
Can I use the set DCHP autorun.brs and add to it,

(Proxy with Username and Password)
nc.SetProxy("http://username:password@proxy.yourcompany.com:port/")

to keep the 1010 DCHP but using a proxy.

To put these settings into the unit do you replace the autorun.brs on the card with the autorun.brs below, then reboot the unit
Regards
Andrew

REM Start of script
EnableZoneSupport(1)
REM Create text widget to display onscreen messaging
mode=CreateObject("roVideoMode")
registry=CreateObject("roRegistry")

rect1 = CreateObject("roRectangle", mode.GetSafeWidth()/4, mode.GetSafeHeight()/2, 500, 40)
rect2 = CreateObject("roRectangle", mode.GetSafeWidth()/4, mode.GetSafeHeight()/2+42, 500, 40)
text1 = CreateObject("roTextWidget", rect1, 1, 1, 0)
text2 = CreateObject("roTextWidget", rect2, 2, 1, 0)
print type(rect)
print type(text)
text1.Show()

text1.PushString("DHCP Network Configuration")
sleep(5000)

REM Adjust network settings here if necessary
REM
nc = CreateObject("roNetworkConfiguration", 0)
nc.SetDHCP()

nc.SetProxy("http://username:password@proxy.yourcompany.com:port/")

rem nc.SetTimeServer("mytimeserver.com") 'Set Time server here,

add address inside quotes
text1.Hide()
ok=nc.Apply()
registry.Flush()

text2.PushString("Settings Updated. Remove Network Configuration Script from flash card.")
if ok=true then text2.Show()
sleep(30000)
REM End of script

Who is online

Users browsing this forum: No registered users and 4 guests