Hi . I have problem. When using ARC the AVR audio will stop after each video segment. So one option I added optical and turned ARC off (also moved HDMI to port 1 for input only to TV (55C803)). However after lots of setting changes I still do not get any audio over the optical at the AVR (yahama v-375).
But best solution would be to make ARC work without shutting audio off after each segment. For example watch Crackle start movie then must switch AVR to another AV then back to AV set for HDMI ARC. When a commercial starts the audio at the AVR goes off. Must do the AV port change again. And again when next movie segment starts. And so on...
P.s. sugest y'all have a test audio page in system settings that would send test sounds . Thanks