first, sorry for my bad english. I hope, that it will be readable =)
My Soundbridge M1001 (3.0.44) got a problem with his network devices. I only got a connection through the wireless device, but not through the lan device. But at the terminal there is listed, that the soundbridge is connected via LAN:
Code: Select all
SoundBridge> ifconfig
ifconfig:
DM90 Interface: 0 (kEthernet) has a manually configured address
MAC Address: 00:0D:4B:04:XX:XX
IP Address: 172.21.8.33
Netmask: 255.255.255.0
Gateway: 172.21.8.1
DNS 1: 172.21.8.1
DNS 2: 0.0.0.0
B200 Interface: 1 (kWireless) is disabled
MAC Address: 00:0D:4B:04:XX:XX
For me it looks like the interfaces are not correct pointed to the configured devices. The LAN device LEDs both are permanently lights up. If I disconnect the LAN cable, I'm still connected and the configuration is the same like listed here.
I hope you can help me with that problem and can give me a hint, how I could fix the problem.
** Solved **
After a reboot into the "safe mode" followed by a factory reset, everthing is now working fine.