Hi to everyone that wishes for PAL support:
Just a quick note to say I've gotten PAL 720P@50Hz and PAL1080i@50Hz video modes working today and the playback of PAL videos is now skip-free using those modes!
When using the built-in player you'll have to manually switch output modes, but Marcelo3d has modified MPlay to automatically switch between NTSC and PAL, provided the proper command line parms are fed to it. After I release the next beta with this PAL support in it, you'll be able to give her a try.
I know how long you all have been waiting for PAL, so thank you for your patience - it's just around the corner.
-Don
Your Digital Media Has Never Looked So Good
Good news Don, I was about to ask if you had made any changes in this beta in respect to PAL, as the stuttering I was seeing all the time is MUCH better.!?
Will these changes also make 576i/50Hz over composite and S-Video skip-free..?
Will these changes also make 576i/50Hz over composite and S-Video skip-free..?
Last edited by SimonO on Thu Jun 16, 2005 2:19 am, edited 2 times in total.
Toshiba 36ZP48, Pace Sky+ v1 (120GB), Sonos ZP80, Denon DVD-2900, Denon AVR-3805, Blue Sky SAT 6.5/B&W DM600 S3/ASW675 w/Behringer DSP1124P, Philips Pronto NG RU950/RU951
Couple questions.
I use the VGA output. I didn't see a VGA PAL option in your .34 release thread. Will that be an option for 720P?
Also, when setting the PAL option in Mplay, will I also need to set it up in the Roku? Or does the photobridge use the settings in Mplay?
I read this on the Mplay site.
I wasn't sure if that meant that you also have to have it set in the Video Setup screen.
Then,
How can I have more than one Mplay app in the same share and tell which one is which? Can the icon/app be renamed to say PAL?
I use the VGA output. I didn't see a VGA PAL option in your .34 release thread. Will that be an option for 720P?
Also, when setting the PAL option in Mplay, will I also need to set it up in the Roku? Or does the photobridge use the settings in Mplay?
I read this on the Mplay site.
-PALRes=nNEW!
Offer output resolution n as PAL option. n is the index in the Video Setup screen.
I wasn't sure if that meant that you also have to have it set in the Video Setup screen.
Then,
How can I have more than one Mplay app in the same share and tell which one is which? Can the icon/app be renamed to say PAL?
Thanks,
Jeff
M1000
Jeff
M1000
jsjames,
First, you need to use the video setup to figure out what are the indices (numbers) of the modes you'd like to use. Use Video Placement to adjust the modes of interest. (select the mode, adjust, select mode, adjust).
Now, add -PALRes=x -NTSCRes=y to the MPlay.roku, where x and y are the resolutions of interest.
Finally, run MPlay, open the file you want to play that is not in your default format. While it is playing, hit [info][info]. Select the desired (NTSC/PAL)resolution from the Video Resolution menu option and select Done.
After this, MPlay will use the mode selected for that file.
M.-
First, you need to use the video setup to figure out what are the indices (numbers) of the modes you'd like to use. Use Video Placement to adjust the modes of interest. (select the mode, adjust, select mode, adjust).
Now, add -PALRes=x -NTSCRes=y to the MPlay.roku, where x and y are the resolutions of interest.
Finally, run MPlay, open the file you want to play that is not in your default format. While it is playing, hit [info][info]. Select the desired (NTSC/PAL)resolution from the Video Resolution menu option and select Done.
After this, MPlay will use the mode selected for that file.
M.-
SimonO wrote:Will these changes also make 576i/50Hz over composite and S-Video skip-free..?
Any news on this Don, PAL/50Hz video still skips using composite and component 576i (NTSC/60Hz plays fine)..?
Toshiba 36ZP48, Pace Sky+ v1 (120GB), Sonos ZP80, Denon DVD-2900, Denon AVR-3805, Blue Sky SAT 6.5/B&W DM600 S3/ASW675 w/Behringer DSP1124P, Philips Pronto NG RU950/RU951
Is thid part of 2.0.35 or am i supposed to make this change myself?
I have a realy bad visual stutter, but not an audio stutter, I thought it might be because i am running wireless, but all my test show about an 80Mbps rate (the router and bridge are very close!)
I have a realy bad visual stutter, but not an audio stutter, I thought it might be because i am running wireless, but all my test show about an 80Mbps rate (the router and bridge are very close!)
-jerry-
Sony DAV-SC8
Sony KLV-L32M1
Roku HD 1500 RevB
Netgear Wireless GameAdapter 54MBps
Netgear Wireless Router 108MBps
Sony DAV-SC8
Sony KLV-L32M1
Roku HD 1500 RevB
Netgear Wireless GameAdapter 54MBps
Netgear Wireless Router 108MBps
Who is online
Users browsing this forum: No registered users and 1 guest