Your Digital Media Has Never Looked So Good

Where Can I get 2.34 and 2.36 Firmware?

Locked
 
AlterEcho
Topic Author
Posts: 5
Joined: Sat Nov 20, 2004 9:47 pm

Where Can I get 2.34 and 2.36 Firmware?

Thu Oct 12, 2006 1:13 pm

I have tried the links, but they are dead.

Thanks
-=AE=-
Top
 
jm_maclaren
Posts: 329
Joined: Mon Oct 16, 2006 9:03 am

Mon Oct 16, 2006 9:07 am

I am also looking for the newer firmware. Does anyone know how to get it now the roku site doesnt offer pb files anymore
Top
 
User avatar
TheEndless
** Valued Community Member **
Posts: 9231
Joined: Mon Oct 04, 2004 10:15 am
Location: US
Contact:
Contact TheEndless

Mon Oct 16, 2006 10:19 am

I sent a PM to RokuMike last week about this. He said he'd pass it on to the appropriate people. Until they get around to updating the links, I've made 2.0.35 available here: http://www.permanence.com/roku/formatup_2035.zip

TheEndless
My Channels: http://roku.permanence.com - Twitter: @TheEndlessDev
Instant Watch Browser (NetflixIWB), Aquarium Screensaver (AQUARIUM), Clever Clocks Screensaver (CLEVERCLOCKS), iTunes Podcasts (ITPC), My Channels (MYCHANNELS)
Top
 
rhubarbe
Posts: 32
Joined: Wed Oct 04, 2006 5:42 am

Tue Oct 24, 2006 4:16 pm

Thanks. :) I assume that the formatup.rok from the top thread is the 2.0.36 firmware?

Do you recommend that I update to 2.0.35 first, or just go for 2.0.36? I'm going to take my Art Pack CF card to the office tomorrow and burn some firmwares onto it. Presume it's only safe to do one at a time. Firmware on my box was still 1.5.18, no wonder the guy got hacked off with it. I have 816 MPEG-2 (PS and TS) files and 11000 MP3 files. And out of the box the HD1000 won't play a single one of them.

However, I shall upgrade the FW and use MPlay, and we shall see.
Top
 
User avatar
TheEndless
** Valued Community Member **
Posts: 9231
Joined: Mon Oct 04, 2004 10:15 am
Location: US
Contact:
Contact TheEndless

Tue Oct 24, 2006 4:20 pm

rhubarbe wrote:
Thanks. :) I assume that the formatup.rok from the top thread is the 2.0.36 firmware?

Do you recommend that I update to 2.0.35 first, or just go for 2.0.36? I'm going to take my Art Pack CF card to the office tomorrow and burn some firmwares onto it. Presume it's only safe to do one at a time. Firmware on my box was still 1.5.18, no wonder the guy got hacked off with it. I have 816 MPEG-2 (PS and TS) files and 11000 MP3 files. And out of the box the HD1000 won't play a single one of them.

However, I shall upgrade the FW and use MPlay, and we shall see.

I, personally, would go with 2.0.35. The only difference between the two is a supposed increase in SMB bandwidth, but many people reported problems with it. So, give 2.0.35 a try first, and only move up to 2.0.36 if you have issues with high bitrate video files.

TheEndless
My Channels: http://roku.permanence.com - Twitter: @TheEndlessDev
Instant Watch Browser (NetflixIWB), Aquarium Screensaver (AQUARIUM), Clever Clocks Screensaver (CLEVERCLOCKS), iTunes Podcasts (ITPC), My Channels (MYCHANNELS)
Top
 
dgburns
Posts: 807
Joined: Mon Jun 27, 2005 9:37 am

Wed Oct 25, 2006 9:44 am

I don't have 2.0.36. If you have any problems with 2.0.35, you can get 2.0.34 here: http://home.comcast.net/~burnsdg/roku/formatup_2034.rar
HD-1500 RevB #1 (media room)
Mitsubishi WD-62528 62" LCD RPTV
Kenwood VR-407 receiver w/PSB Alpha's
PS/3 60GB (now 250GB) w/750GB Seagate ext
M1000 (upstairs)
HD-1000 RevB #2 (bedroom)
Visco 32" LCD
AR 2.1 audio system
PS/2
Top
Locked

Who is online

Users browsing this forum: No registered users and 2 guests