My Soundbridge Radio is not reading my SanDisk SDHC 4GB card when I put it in the slot.
I'm sticking it in and when I toggle between the functions (am/fm radio, internet radio etc) nothing happens. I've tried with two similar cards.
Any suggestions would be welcome.
Cheers
Your Digital Media Has Never Looked So Good
Re: SD Card Slot - Not working or is it just me?
Dstubbs wrote:My Soundbridge Radio is not reading my SanDisk SDHC 4GB card when I put it in the slot.
I'm sticking it in and when I toggle between the functions (am/fm radio, internet radio etc) nothing happens. I've tried with two similar cards.
Any suggestions would be welcome.
Cheers
Hello Dstubbs and welcome to the forum!
Yes, use a none HC SD card.
The chip set for the SD slot will no support SDHC (even with new drivers (RokuMike)), therefore the largest card you can use is a 2GB.
Hopefully that is helpful, Matt
Roku3 and Roku HD1000 [Rev B] on a Samsung HLP5674W DLP in the living room; a Roku2 and two Roku XS and a few SoundBridges.Win7; Kubuntu and XP via RT-N66U, E2000 and a switch or two. I own stock in Roku, it's just all in the form of hardware.Viva la Roku
Hi Dstubbs:
I actually have a 4GB Transcend 150x SD (non-HC) card that works in my SoundBridge Radio just fine. I think I remember reading that 4GB was the max size available under the non-HC standard.
http://www.newegg.com/product/product.a ... 6820163159
Perhaps other 4GB non-HC (slower than 150x) versions might work just fine too:
http://www.amazon.com/Transcend-Flash-m ... =pd_cp_e_1
http://www.amazon.com/Transcend-Flash-m ... y_e_text_b
I actually have a 4GB Transcend 150x SD (non-HC) card that works in my SoundBridge Radio just fine. I think I remember reading that 4GB was the max size available under the non-HC standard.
http://www.newegg.com/product/product.a ... 6820163159
Perhaps other 4GB non-HC (slower than 150x) versions might work just fine too:
http://www.amazon.com/Transcend-Flash-m ... =pd_cp_e_1
http://www.amazon.com/Transcend-Flash-m ... y_e_text_b
gcd0865 wrote:Hi Dstubbs:
I actually have a 4GB Transcend 150x SD (non-HC) card that works in my SoundBridge Radio just fine. I think I remember reading that 4GB was the max size available under the non-HC standard.
http://www.newegg.com/product/product.a ... 6820163159
Perhaps other 4GB non-HC (slower than 150x) versions might work just fine too:
http://www.amazon.com/Transcend-Flash-m ... =pd_cp_e_1
http://www.amazon.com/Transcend-Flash-m ... y_e_text_b
yea, I was going to post about the hooptie 4GB, but didn't have my facts. Is it two flash rams, or just one? It sounded like it was some hybrid when I first heard about it a couple years back. People were using them in their Rio Forge MP3 players with the "directors cut" firmware.
Roku3 and Roku HD1000 [Rev B] on a Samsung HLP5674W DLP in the living room; a Roku2 and two Roku XS and a few SoundBridges.Win7; Kubuntu and XP via RT-N66U, E2000 and a switch or two. I own stock in Roku, it's just all in the form of hardware.Viva la Roku
Re: SD Card Slot - Not working or is it just me?
Seems like Roku, would make the SD vs SDHC card clear in the Manual and also if there is a size limitation. I just purchased a SoundBridge R1000, but the manual is very vague and if had not been very technical with a PC and Wifi, then maybe I would have to sent it back. It seems that the company has not invested much into their software developement over time, SD is very old technology and most items now are SDHC.
Thanks for the info!!
Thanks for the info!!
Who is online
Users browsing this forum: No registered users and 1 guest